Details
T-motor F4 OSD Flight Controller
Input Voltage: 2-8S ( 8.4V-33.6V)
Firmware: TMOTOR F4 (Betaflight)
OSD: Betaflight OSD
BEC: 5V @ 2A
MCU: STM32F405RGT6
Gyro: ICM20602
Flash: Onboard 16M
Size: 37x37x7mm
Mounting Hole: 30.5×30.5mm
Weight: 7g
IMPORTANT
Attention! If the flight controller starts only from, the error phenomenon can only be accepted under warranty if no solder has been made to the flight controller. Please always check before soldering! Defects caused by soldering cannot be repaired under warranty.
